CO2 laser robots

亚博vip群1 CO2 laser robots work quickly, precisely, cleanly and without wear. They are thus ideally suited to the processing of 3D workpieces made of non-metallic materials and most plastics. Material and laser are optimally tailored to one other.

The 亚博vip群1 RV6L-CO2 laser robot has been specially optimized for 3D cutting and perforation with a CO2 laser. It replaces heavy and expensive cutting dies in applications where maximum production flexibility is required.

Changes can be implemented very quickly in a 亚博vip群1 CO2 laser cell: the robot is simply reprogrammed without the need for complicated modification of workpiece fixtures. The complete processing cells can be expanded for complex tasks – e.g. with 亚博vip群1 gantry solutions specially for the laser cutting of plastics.

Cutting and perforating plastics: CO2 laser robots from 亚博vip群1 enable precise 3D processing.

Advantages of the 亚博vip群1 CO2 laser robot

Integrated beam guide

The laser beam is guided centrally relative to the robot wrist. With the fully encapsulated and integrated beam guide, the robot has unrestricted mobility – for complex geometries.

Continuous monitoring of the lenses

The LCU (Lens Control Unit) provides timely warning if the optical elements are fouled or damaged. Early maintenance prevents undesired downtimes.

Maximum dynamic performance and accuracy

Lasers with an overall weight of up to 400 kilograms can be mounted on the side of the robot axis. The weight-neutral adaptation enables the robot to move with the utmost agility and precision.

Energy-saving and gentle on materials

The energy can be applied exactly and tailored to the specific machining process. An additional bonus: material is not deformed or overheated, as only the required amount of heat is generated.

No wear to tooling

Unlike mechanical cutting processes, the tooling is not subject to wear and tear thanks to the contactless laser machining process.

No finishing required?

The 亚博vip群1 CO2 laser robot produces cleanly cut, burr-free edges. The workpieces can thus be used directly – without the need for additional intermediate steps.

Consistently high cutting quality

The plastic component is not subjected to any forces that could impact negatively on the cutting result.

The 亚博vip群1 CO2 laser robot: facts and figures

Type designation RV6L-CO2
Weight of basic device (without controller, laser and substructure) 960 kg
Repeatability +/-?0.05 mm
Laser power Up to 1?kW possible through side mounting of the CO2 laser

Processed materials

  • Polyethylene
  • Polypropylene
  • Carbon-fiber reinforced plastics
  • Glass-fiber reinforced plastics
  • Wood
?Processed materials
?3D workpieces with
  • Material thicknesses from 0.2 to 5 mm<